20 GA 1/2 oz TSS Load

Open discussion on Tungsten Super Shot "TSS" Handloading.

Moderator: hawglips

hawglips
Posts: 290
Joined: Fri Feb 19, 2016 4:56 pm

Re: 20 GA 1/2 oz TSS Load

Postby hawglips » Sat Oct 08, 2016 3:13 pm

1/2 oz of #10s did well today on wood ducks.

This was with the 28 ga - I basically took my 9/16 oz load, backed off 1/16 oz, added an extra grain of powder.



Dave in AZ
Posts: 106
Joined: Thu Mar 10, 2016 1:38 pm

Re: 20 GA 1/2 oz TSS Load

Postby Dave in AZ » Sat Oct 08, 2016 5:16 pm

Saw that at DHC. Can never decide where to post... I'm home sick today, so no quail or duck hunting, just forum reading :(

What did the cleaning show for wounds, wound channel, etc.? I'd be very worried about finding all that TSS#10 in the meat, the wounds would be so small and pellet too, easy to miss. Thoughts?



hawglips
Posts: 290
Joined: Fri Feb 19, 2016 4:56 pm

Re: 20 GA 1/2 oz TSS Load

Postby hawglips » Sat Oct 08, 2016 6:12 pm

I didn't see any pellets in the breast meat at all in the initial cleaning. It looks like total pass throughs at first look. But I'll go through it closer...



User avatar
Fishh2o
Site Admin
Posts: 306
Joined: Thu Feb 18, 2016 2:02 pm
Location: Oldsmar Fl

Re: 20 GA 1/2 oz TSS Load

Postby Fishh2o » Sat Oct 08, 2016 11:01 pm

hawglips wrote:1/2 oz of #10s did well today on wood ducks.

This was with the 28 ga - I basically took my 9/16 oz load, backed off 1/16 oz, added an extra grain of powder.



Thats what i've been loading up for my 1100 LT20 the 9/16th load bit with 9.5s.


Roll with it. If you stay above 55 the wheel wont fall off.


Return to “TSS”

Who is online

Users browsing this forum: No registered users and 0 guests