new loads for duck season 2019

Open discussion on Tungsten Super Shot "TSS" Handloading.

Moderator: hawglips

hawglips
Posts: 386
Joined: Fri Feb 19, 2016 4:56 pm

new loads for duck season 2019

Postby hawglips » Fri Jun 28, 2019 10:15 am

Got a few new loads worked up and ready to go for duck season this year.

28 ga

1-1/8 oz, 1294 fps, 8922 psi

20 ga

7/8 oz, 1404 fps, 9893 psi
1-1/8 oz, 1366 fps, 7588 psi
1-1/4 oz, 1340 fps, 8915 psi
7/8 oz TSS x steel, 1607 fps, 9895 psi
1 oz TSS x steel, 1520 fps, 9990 psi

12 ga

1 oz TSS x steel,1537 fps, 7974 psi
1-1/8 oz TSS x steel, 1548 fps, 10813 psi



paulinkansas
Posts: 79
Joined: Fri Mar 11, 2016 11:28 am

Re: new loads for duck season 2019

Postby paulinkansas » Fri Jun 28, 2019 1:15 pm

For your 12 gauge loads, are you using 1/4 oz TSS and the rest of the payload is steel?
Are you using 7/8 oz steel wads for the 1.0 oz duplex load, and 1.0 oz wads for the 1.125 oz duplex load? All the above is sort of what I do. Unfortunately I have to pay full retail price for my components, including TSS.



hawglips
Posts: 386
Joined: Fri Feb 19, 2016 4:56 pm

Re: new loads for duck season 2019

Postby hawglips » Mon Jul 01, 2019 9:15 am

paulinkansas wrote:For your 12 gauge loads, are you using 1/4 oz TSS and the rest of the payload is steel?
Are you using 7/8 oz steel wads for the 1.0 oz duplex load, and 1.0 oz wads for the 1.125 oz duplex load? All the above is sort of what I do. Unfortunately I have to pay full retail price for my components, including TSS.


Those two were tested at the lab with 1/4 oz of TSS under the steel. Yes, on the wads....




Return to “TSS”

Who is online

Users browsing this forum: No registered users and 1 guest