Testing with BPI Max .410 Wad

Post your 410 Gauge pattern results.

Moderator: hawglips

Posts: 53
Joined: Fri Apr 02, 2021 8:29 am

Testing with BPI Max .410 Wad

Postby DagSwane » Mon Jul 12, 2021 4:50 pm

Has anyone loaded with the 3” .410 hull and the newer BPI Max .410 wad? I made up some 3” and 2.5” (cut the wad back) loads in March and again this weekend. After loading some bismuth 6’s in AA Hulls and sp410 wads, I noticed the Max.410 wads appear very similar to the Remington Wads, but for straight wall Hulls, and with a bit thicker plastic on the petals. TPS wads over all still seem to load better. I have some lead 8’s, steel 6, bismuth 6’s and 7’s, HW13 and HW15 to try some testing with for these wads.

Dave in AZ
Posts: 241
Joined: Thu Mar 10, 2016 1:38 pm

Re: Testing with BPI Max .410 Wad

Postby Dave in AZ » Wed Jul 21, 2021 3:12 am

I bought some, but haven't used them.
Just got some backordered 410TPS wads a few weeks ago, will likely use those first. Not sure why I got the 410 max, they were available and large heh.

Return to “410 Gauge”

Who is online

Users browsing this forum: CommonCrawl [Bot] and 0 guests