Filler Wads

Open discussion on Tungsten Super Shot "TSS" Handloading.

Moderator: hawglips

Hellbender
Posts: 3
Joined: Wed Oct 02, 2019 9:25 am

Filler Wads

Postby Hellbender » Sat Oct 12, 2019 1:37 pm

What's preferred? Under the shot or over the shot?



Greg
Posts: 14
Joined: Fri May 31, 2019 7:25 am

Re: Filler Wads

Postby Greg » Sat Oct 12, 2019 7:22 pm

I have used felt fillers both above and below in my steel shot loads spiked with tss and found little to no difference in pattern. So now I just put on top as it's easier.



paulinkansas
Posts: 79
Joined: Fri Mar 11, 2016 11:28 am

Re: Filler Wads

Postby paulinkansas » Sun Oct 13, 2019 10:14 am

If must resort to using fillers, put them on the bottom for lower pressure. If you want to do what I do, substitute the next smaller sized wad of the same style called for in the recipe. If the recipe calls for a 1.0 oz wad, sub a .875 wad of the same style and it'll hold a 1.0 oz duplex load with a nice crimp.




Return to “TSS”

Who is online

Users browsing this forum: No registered users and 0 guests