Hi every body,
Very interested since years by TSS but just now have the opportunity to buy a few Kg #5 #7 and #9. I'm from France where nobody knows the TSS. Just a little experience in reloading so very avide from good advises and discussions.
Glad to be in this forum !
Fabalis
Moderator: hawglips
-
- Site Admin
- Posts: 318
- Joined: Thu Feb 18, 2016 2:02 pm
- Location: Oldsmar Fl
Re: Fabalis
Wellcome! We have a good group of users so far that are knowledgeable on TSS and handloading.
Please post your questions,
Please post your questions,
Roll with it. If you stay above 55 the wheel wont fall off.
-
- Posts: 144
- Joined: Fri Mar 11, 2016 11:28 am
Re: Fabalis
Hello from the USA. What kind of reloading equipment and supplies do you use in France? Presses, hulls, primers, wads, powder, etc? I use a MEC 600 jr, Federal and Cheddite hulls and primers. Wads come from 4 major sources. Powder is steel from Alliant.
-
- Posts: 27
- Joined: Sun Apr 03, 2016 11:29 am
- Location: France
Re: Fabalis
Hi,
Here in France, we have access to a lot of good hulls made by Cheddite or Fiocchi (except 10 ga) but no possibility to play with Winchester or Federal.
For the powders, we can buy the SPARTAN and the VITHA line so it's enough but unfortunately, there is good data base for lead but almost nothing for steel loading and a fortiori less than nothing for pellets denser than lead...
I use A1, A0 and BA9 from SPARTAN and 3N38 from VITHA.
For the wads, we have access to the Gualandi and B&P line so no problem...
I decided to use Gualandi type LBC-43 for TSS and hope it's a good choice !
Here in France, we have access to a lot of good hulls made by Cheddite or Fiocchi (except 10 ga) but no possibility to play with Winchester or Federal.
For the powders, we can buy the SPARTAN and the VITHA line so it's enough but unfortunately, there is good data base for lead but almost nothing for steel loading and a fortiori less than nothing for pellets denser than lead...
I use A1, A0 and BA9 from SPARTAN and 3N38 from VITHA.
For the wads, we have access to the Gualandi and B&P line so no problem...
I decided to use Gualandi type LBC-43 for TSS and hope it's a good choice !
Who is online
Users browsing this forum: No registered users and 1 guest